Connect with us

Home > Bda Driver > Bda Driver Diseqc

Bda Driver Diseqc

All commands are transferred via the coaxial cable. Another thing can be helpfull also:Variuos hardware is using TwinHan-Drivers - although they seem to be manufactured and distributed by 'NoNames'....Therefore all users please have a look in the LOG-File 'BDA_ALL.LOG' Signal box will show if tuner was able to lock a signal. From the point of view of an engineer the Revolution Series represents different devices with different types of power supplies with different implementations in the basic circuit.

The configuration file (Dev_Bda2Driver.cfg) should be placed in the same folder as the interface ( If a satellite transponder list is selected in the Main Window, the console additionally displays site-dependent angles calculated by TransEdit (azimuth and elevation of the satellite position, motor angle). Additionally it is more difficult in a PC to achieve an accurate DiSEqC timing. With this driver i can change many times i like without have to do a reset device.

And It solves my problem with BDA device initialization which fails with default DD's DVB-T BDA device driver. Sign In Sign Up Forum Back Forum Forums Search Google (site) Activity Back Activity All Activity Wiki Back Wiki Wiki German Wiki Englisch Main Page Back Main Page Members Section TransEdit Set West/East Limit stores the present motor position as „soft“ limit in the positioner unit.

All using XP-Professional - everytime up2date Top Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending Post Reply Print view 74 posts Technotrend-3200 displays fine, but lacks margin. 1.8m, DW, Intelsat 9, 58W, 3840 H 27690, 7/8, DVB-S 100% 57% Easy lock for Prof-7301. Yes, my password is: Forgot your password? Please download from same location mentioned above.

More hints concerning the „Extended“ setting are given at the end of the DiSEqC Editor section (see below). if a command selects Input 1 of an Uncommitted Switch (see below), and this input is connected to a Committed Switch, the second switch will probably need some time to power If the „Steps“ value is zero, the motor moves continuously until you release the button, letting the Console send a Halt Command. What's New?

Therefore every vendor of DVB-S devices uses a different method, or with other words, DiSEqC has to be implemented vendor-specific in an application. I used the same transponder.ini file with all DVB players (except of ProgDVB which have its own transponders database format). Technotrend-3200 is able to lock and scan, but picture breaks up constantly. 80cm, BVN, AMC 4, 101W, 12120 V 30000 3/4, DVB-S 100% 54% Fairly easy signal. That saves memory on machines with a little less of it...

Furthermore, some modern devices do implement BDA, but are restricted in functionality because of limitations in BDA to support specific features, such as DiSEqC and CI. It updates frequencies when scanning by obtaining necessary data from Transport Stream of other active frequencies. Additionally we have approved the information that Prof 7301 can receive SkyVision data feeds from Intelsat 4 (72.,0°E) – transponder 12591,V,2/3 where SR value is 43200 (FEC: 2/3). It consists of almost all DVB applications available at present.

You can copy the channels you want to that list moving them around as you wish. v - 2013.02.05 - CrazyCat - Fix DVBWorld BDA-extension support (DiSEqC 1.x). v - 2012.05.07 - CrazyCat - Fix Bestunar/DVBSky BDA-extension support (DiSEqC 1.x). It's easy!

Equals the „Angular Position“ command that is selectable in the Main Window (see above), but can be used here as part of a DiSEqC sequence. Good work guys! Finally click „Apply“ in order to update all contained channels to the new settings. The DiSEqC protocol operates in the following manner: BDA drivers of PTG Engine prepare DiSEqC commands.

Open the DVB Network Properties by clicking the Properties Tool Button at the bottom. There is no LED status indication. TransEdit and DVBViewer update these bits in the „Committed {Updated}“ command according to the transponder and send the command each time when the polarization or frequency band changes.

Renaming the original back to (after rebooting) and all is well again.

The "Favourites" type of list can be edited. Thnaks, Rhys Rhys.Goodwin, March 21, 2007 Google AdSense Guest Advertisement Log in or Sign up to hide all adverts. Team MediaPortal deeceefar2 Retired Team Member Joined: December 1, 2006 Prof 7301 had no problems with receiving this transmission. Dreamer Top FredB love DVB Dream!

Usually positioners will execute this command only if the limits are at present disabled (in order to prevent accidental changes), and automatically enable the limit. Thanks. This is because a tune request must be sent with each DiSEqC command. Only use Simple A/B if you are sure that your DVB-S card is connected to such a tone burst switch.

Open the DVB Network Properties by clicking the Properties Tool Button at the bottom.